60 production-ready Claude prompts for network administrators — configs, troubleshooting, Python scripts, documentation, and security audits. Stop writing prompts from scratch.
┌─ PROMPT PACK v1 ─────────────────────────────┐ │ │ │ 60 production-ready prompts │ │ │ │ ⚙️ Config Generation → 7 prompts │ │ 🔍 Troubleshooting → 7 prompts │ │ 🐍 Python Automation → 6 prompts │ │ 📄 Documentation → 5 prompts │ │ 🔒 Security & Auditing → 5 prompts │ │ 🤖 AI Workflows → 10 prompts │ │ ⚡ Quick-Fire → 10 prompts │ │ │ │ packetpilotai.gumroad.com · $29 │ └───────────────────────────────────────────────┘
The Claude Prompt Pack for Network Admins is a set of 60 structured prompt templates for Cisco IOS, pfSense, and Linux infrastructure work — covering config generation, troubleshooting diagnosis, Python automation, security auditing, and documentation. Each prompt uses [brackets] for your specifics and is designed to produce CLI-ready output on the first attempt, without iterating on vague inputs.
The problem with AI for network work isn’t Claude. It’s the prompt.
Generic prompts get generic results. “Write me an ACL for Cisco IOS” gives you something technically correct but completely disconnected from your environment — wrong interface names, missing your actual subnets, no logging, no comments.
A good prompt tells Claude:
The difference between a bad prompt and a good one isn’t creativity — it’s structure. And building that structure from scratch every time is the tax that slows you down.
We spent time building and refining 60 prompts specifically for network administrators. Not generic “write me a config” prompts — structured templates that get you CLI-ready output, working Python scripts, and professional documentation on the first try.
Every prompt uses [brackets] for your specific details. Fill them in, paste into Claude, get results.
What’s inside:
Configuration Generation — VLAN configs, ACLs, OSPF, BGP, static routing, firewall rules, and IP addressing plans. Cisco IOS, pfSense, and more. Output is ready to paste into CLI.
Troubleshooting Workflows — Packet loss, slow networks, DNS failures, traceroute interpretation, Wireshark filter builders. Step-by-step diagnosis prompts that walk Claude through your exact environment.
Python & Automation Scripts — Netmiko config pushers, automated backup scripts, subnet calculators, VLAN auditors, interface error monitors. Describe what you need and get working code.
Documentation Generation — Turn raw configs into runbooks, SOPs, incident reports, and inventory tables in minutes. Readable by junior techs or senior management.
Security & Auditing — IOS hardening reviews, firewall audits, VLAN security checks, compliance checklists for HIPAA and PCI-DSS, and threat modeling for network changes.
Claude Projects & Workflows — Pre-built system prompts for Claude Projects. Set it once — Claude knows your environment, your vendor, and your preferences every session. No more re-explaining your setup.
Wireless Networks — Site survey planning, Wi-Fi troubleshooting, 802.1X/RADIUS configuration.
AI-Assisted Workflows — Root cause analysis from logs, NOC weekly summaries, vendor escalation emails, RFP evaluation, budget justifications, post-mortem facilitation.
10 Quick-Fire Prompts — Instant answers for err-disabled ports, STP explanations, QoS for managers, Python one-liners, and more.
If you manage Cisco, pfSense, Linux-based infrastructure, or any combination — and you’re already using Claude or want to start — this pack gives you a running start.
It’s especially useful if you:
The prompts are templates. Replace anything in [brackets] with your specifics, paste into Claude, and iterate from there.
For best results:
The pack is available now on Gumroad for $29.
→ Get the Claude Prompt Pack for Network Admins
60 prompts. One PDF. No subscription, no upsell — just the prompts.
More guides, scripts, and tools for network administrators at packetpilotai.com.
What’s included in the Claude Prompt Pack for Network Admins? 60 structured prompt templates organized into seven categories: config generation (VLAN, ACL, OSPF, BGP, static routing), troubleshooting workflows, Python and Netmiko automation scripts, documentation generation, security and auditing, Claude Project system prompts, and 10 quick-fire prompts for common one-off tasks.
Which vendors do the prompts cover? Cisco IOS and IOS-XE are the primary platforms, with coverage for pfSense, Juniper JunOS, and Linux-based infrastructure. The prompts include vendor-specific syntax guidance and output formatting for each platform.
Do these prompts work with Claude Haiku, or do I need Sonnet? The prompts work best with Claude Sonnet or Opus. Haiku handles simple config generation adequately but struggles with longer rulebases, complex multi-step troubleshooting workflows, and nuanced auditing tasks. The pack documentation recommends Sonnet as the baseline.
Can I use these prompts in a Claude Project with a custom system prompt? Yes — the pack includes pre-built Claude Project system prompts that configure Claude with your network environment context: your vendor preferences, your IP addressing scheme, your typical device models. You paste the system prompt once, and every subsequent prompt in that project benefits from the context without re-explaining it.
Is the pack updated when Claude models change? Purchasers receive lifetime updates via Gumroad. As Claude models change and prompt techniques evolve, updated versions of the pack are distributed to all prior purchasers at no additional cost.
Q: What is the PacketPilot Claude Prompt Pack?
A: The PacketPilot Claude Prompt Pack is a collection of 60+ pre-written prompts for network admins, organized by use case: config generation, troubleshooting, Python automation, security auditing, and documentation. It is a $29 PDF designed to save hours of prompt engineering.
Q: What prompts are included for network administrators?
A: The pack covers seven categories: Config Generation (Cisco, pfSense, VLANs, ACLs), Troubleshooting (diagnosis, root cause, postmortems), Python & Automation (Netmiko, NAPALM scripts), Security & Auditing (firewall reviews, ACL analysis), Documentation (runbooks, change tickets), and Quick-Fire one-liners for common tasks.
Q: Does the prompt pack work with ChatGPT or only Claude?
A: The prompts are written for Claude but work with any capable LLM including ChatGPT-4o and Gemini Advanced. Claude is recommended because it handles long network configs and detailed technical reasoning particularly well.